The basic packaging principle of the LANDPACK automatic screw packaging machine is to heat the composite film to have moldability and processability, use the installed packaging machine to form the mold, transport the film material to the mold system, punch out the shape of the packaging bag, and put the packaging to be packaged. Items are filled into bags.
The automatic vertical packaging machine has the characteristics of fast, efficient, accurate, economical, adaptable, and can pack a variety of items. It is the widely used machine in our daily life. Maintenance when using the equipment is very important. Improper maintenance will lead to a low service life of the automatic stretch vacuum packaging machine. Let me share with you the maintenance rules of the automatic screw packaging machine.
Vertical packaging machine
The most important is to add lubricating oil regularly. Since long-term work can lead to improper running-in of the internal machine and insufficient internal fit, proper application of lubricating oil can help it work better. It is recommended to add it every 80 days.
The second point is security. The standard air pressure of the full automatic screw packaging machine is 0.3-0.6MPa, which should not be adjusted too large or too small. Or the performance of the machine will be bankrupted. Moreover, the automatic vertical packaging machine must have a safe grounding device to work, which is a very important issue.
The third point is the inspection inside the machine. Before each operation of the machine, the inside of the machine must be inspected. Inspection items include air source, power supply, cleaning of vibrating plate, thermocouple, cutter, etc. to assurance the quality of bolts machine work.
Fourth, when moving the automatic screw packaging machine, it must be in an upright state, and should not be bumped, tilted, or put down.
9 Points of LANDPACK Screws Packing Machine
The automatic screw packaging machine is dated from the traditional semi auto packaging machine. It is controlled by the PANASONIC PLC system and uses a pneumatic device, so that the counting is highly accurate. The error of the package screw is 1%, and the error of each package of 1000 is 1, and it is a pneumatic device, and the power consumption is 1/200 of the traditional. Applied to hardware, furniture, construction, toys, medicine and other industries. Can meet the requirements of users.
When using the automatic screw packaging machine, pay attention to some problems in order to better operate the automatic packaging machine and make it work better.
1. Before using , please double check whether all parts of landpack automatic packaging machine in good condition and whether the machine screws are loose. If there is any problem, please solve it in time.
2. Better clean the feeder and weighing ,bagging to ensure that the products are highly hygienic.
3. After the machine is turned on, set the temperature of the temperature controller on the man-machine interface, and apply the packaging film.
4. Adjust the bag making and coding effect, and start making packaging bags and feeding materials.
5. Check the sealing finished bag and make sure it is completely sealed no leakage or damaged .
6. In production process, it is necessary to check the pack quality of the products from time to time. If any problems are found, the work of the packaging machine should be stopped in time.
7. To use the packaging machine properly, do not debug each part by hand while machine is runing .Pay attention to safety, safety running is important.
8. If there is a problem with the packaging machine, please stop it immediately and check and deal with it in time. After the problem is fully solved, the LANDPACK packaging machine can be started.
9. Check the running direction of the conveyor belt to ensure that the conveyor belt is running in the normal direction.