Small Vertical Furniture Fittings Hardware Bagging Packing Machine

Introduction: This system is for packing two material into a small pouch. It is weighing by counting disks.It is suitable for a wide range of hardware and fastener, such as screw, nut, nail, rivet, bolt, etc.

1. Sophisticated counting control device to ensure that each bag is accurate.

2. Packaging icon packaging materials, the machine advanced step control, with the use of color tracker can get the perfect icon design.

3.PLC program, more intelligent,shows very clear,easier for operation.

4. SCM control system, fault self-stop, self-alarm, self-diagnosis, safe and easy to use.

5. Automatic display of the number of packages, the statistics can easily work out the machine.

6. Single vibration disk measurement of a single screw, if you need to pack a variety of specifications at the same time the need for multiple vibration disk supporting the use of.

1. Machine frame: stainless steel 201

2. Film materials: Co-extrusion PE film; heat sealable composite film such as OPP, CPP, PE

3. Sealing: Back sealing/Three sides sealing

4. Film width: 320mm (widest)

5. Bag width: 30-150 mm (replacement of the bag former to change the width)

6. Bag length: ≤280mm (The length can be adjusted in touch screen)

7. The width of vertical seal: 8-10mm adjustable

8. Voltage: 220V,380V/50Hz/60Hz

9. Packing speed: 10~50 bag/min (It depends on actual materials)

10.Counting Range:1-10000pcs

11. Sealing embossing: straight/ textured/plain

12. Bag making device: Elephant trunk molding

13. Cutting knife: serrated knife or dense serrated knift

14. Exhaust method: pinhole echause or sponge exhause

15. Vibration feeder included

16. The discharge height of output belt conveyor: 500~700mm adjustable